Sentence examples for maximum nominal stress from inspiring English sources

The maximum nominal stress increased with decreasing diameter since work hardening of the drawn wire.

Deck failure was defined as deck plate's ultimate strength becoming lower than the maximum nominal stress.

At critical condition that is at maximum load P u the half of crack length a becomes equal to a c and σ N to σ Nu in which σ Nu is the maximum nominal stress.

Cohesive zone model as well as two of its common initiation criteria, namely quadratic traction-separation criterion and maximum nominal stress criterion, are used to study crack initiation location and orientation under fretting conditions.

This mathematical relationship may be regarded as the extension of the expression about the relationship between the maximum nominal stress and the porosity for these materials under uniaxial tensile and compressive loads.

A sinusoidally varying compressive force of between 16 N and 36 N (giving a maximum nominal stress of 1.7 MPa) was applied during the testing.

The results show that, when the porous body endures the fracture resulting from shearing loads or from torsion, the maximum nominal shearing stress or the nominal torque for the porous component can be described with the porosity and the inherent characteristic parameters of the metal foam itself.

It is shown that strength or peak nominal stress (maximum point at the engineering stress strain diagram) decreases with specimen size while toughness or total work to fracture per nominal area (area under the curve in the engineering stress strain diagram integrated along the length of the considered one-dimensional specimen) increases.

Based on a model derived from the closure behaviour of microcracks and the intrinsic resistance of metals and alloys to fatigue damage, this software allows predictions to be readily applied to quickly provide fatigue crack initiation life predictions for a wide range of alloys based on inputs of a nominal stress spectrum, a maximum spectrum stress and a net stress concentration factor.

(a) Nominal stress vs nominal strain for five different particle diameters and for the continuum model.

(f) The base SN curve was transformed from nominal stress into an effective stress SN curve.