Sentence examples for fiber separation from inspiring English sources

For the thermal challenge, a small angled thermostatic SLD probe 457 (Perimed) with 0.25 mm fiber separation was used.

In addition, the capture efficiency and pressure drop both increase with the fiber separation ratio, while the quality factor decreases.

Firstly, the whole image is filtered and reduced by a closing operation in order to achieve a good fiber separation in the image data.

Finally, a laser Doppler probe (0.25 mm fiber separation, 780 nm wavelength; Perimed AB, Järfälla, Sweden) was sutured to the surface of the kidney for cortical measurements, and a needle laser Doppler probe (0.15 mm fiber separation, 780 nm wavelength) was inserted 10 12 mm into the kidney for medullary measurements.

The extent of turbulence suppression and "fiber separation walls" varied with the fiber volume fractions, which affected the bubble size distribution in different regions.

This fiber separation caused by high intensity mixing led to efficient load transfer from matrix to fiber, and improvement of interfacial strength.

The reduced CBF reponse at larger fiber separations has also been observed in the rat brain by Cheung et al. [ 19] for a 9 mm source-detector separation.

Fiber separations of 2-5 mm have been shown to be optimal for measuring chromophore volume fractions in the presence of a variable scattering background [ 12].

These differing contrasts clearly show the importance of choosing the fiber separations correctly as the anomalies are only detected when the correct source detector separations are used, as expected.

The normalized spectra from the 4.54% ILp phantom show decreases in R S D N vs. wavelength for the small fiber separations (ρ = [0.2, 0.4] mm), but an increase of R S D N vs. wavelength for the large ρ (2.0 mm).

These fiber separations roughly compare a maximum sensitivity depth of around 4.4 mm to depths of 8.8 mm and 22 mm; these approximations are based on the case of an infinite half space as given in [ 34].