Sentence examples for mg of dye from inspiring English sources

qmax is the maximum q capacity (mg of dye [mg of coagulant]−1), and b is the Langmuir adsorption constant ([mg of dye] L−1).

where С 0 and С к are the initial concentration of dye (mg/L) and the residual dye concentration (mg/L), respectively; a is the adsorption of x (mg) of dye onto 1 g of sorbent (mg/g) from 50 ml of solution.

For dextran labeling around 2.5 mg of dye and 7.5 mg dextran were dissolved in 400 µl sodium bicarbonate buffer pH 9.

Total adsorption is reported as mg of dye per gram of biomass.

Total adsorption is determined as mg of dye per gram of biomass substrate.

In each case, 1 mg of dye was first dissolved in 100 μL dimethylsulfoxide.

To evaluate conjugation yield, 3 mg of dye-conjugated polymer was dissolved in DMSO and then the contents of the dye in the polymer were measured with the UV spectrophotometer.

It depicts the percentage removal in a standarized trial with 100 mg L−1 of dye and 200 mg L−1 of coagulant, pH 7 and 20°C.

The significance of adsorbent concentration was examined, using 0.02 0.2 g of both composites and 40 mg L−1 of dye solution in 100 mL solution (pH 2).

The highest removal percentage of 99.5% was attained at the optimum conditions of 0.035 g of the adsorbent, 25.0 mg L−1 of dye concentration, 6 min sonication time and pH = 5.5.

The large mg amounts of dye may be responsible for the lack of dynamical lymph motion observed using these devices.