Sentence examples for maximum room temperature from inspiring English sources

The PEO-15 wt% (LiCF3SO3) solid polymer electrolyte exhibited maximum room temperature ionic conductivity.

The plasticized blend hybrid electrolyte exhibits a maximum room temperature ionic conductivity of 8.8 × 10−3 Scm−10−3

The maximum room temperature dielectric constant (ε r ) was as high as 474 at 10 kHz with an acceptable low loss (tanδ) around 0.02 at 10 kHz.

The maximum room temperature shear strength of the joints was about 272 MPa, which was approximately 79% of the QAl7 tensile strength (as-annealed) when the brazing temperature was 950 °C.

The maximum room temperature and the temperature difference from ambient are 45.5 °C and 12.25 °C for forced circulation and 41.75 °C and 8.5 °C for natural circulation respectively.

In unplasticized system, the maximum room temperature conductivity of (2.07 ± 0.53) × 10−5 S cm−1 is obtained by the electrolyte consists of 75 wt.% starch and 25 wt.% LiOAc.

The carrier mobility shows 1000 cm2/V s in maximum at room temperature.

Results showed that uninsulated brick veneer wall is the most vulnerable design, experiencing a maximum daytime room temperature of 31 °C and proportion in discomfort of 31.5% during heatwaves.

The intensity of the final color was maximum at room temperature for both drugs; increasing temperature resulted in formation of a precipitate which may be due to coagulation of the formed complex.

It can be seen that the shear strength of the joint  was maximum at room temperature, were the oxide content of the alloy surfaces would ideally be at a minimum and would have good adherence to the aluminum alloy surface.

Specimens reinforced with fibres of two types (twisted or hooked), two aspect ratios (l/d = 60 or 80), and three fibre contents (volume fractions of 0.25%, 0.5%, or 1%) were tested after exposure to four different maximum temperatures (room temperature, 300 °C, 500 °C, and 700 °C).