Sentence examples for maximum power obtained from inspiring English sources

Although, the maximum power obtained was less ca. 26 mW/m(^2).

The maximum power obtained using body mounted solar panels and advanced triple junction solar cells on a triple unit Cubesat is typically less than 10 W.

However, in case of fly ash and chalk powder the minimum and maximum power obtained is 9.27, 8.54 and 14.77, 17.40 W, respectively, at a sample weight of 5 g.

In this section, we analyze the processing times, energy consumption and maximum power obtained by different combinations of the modules reported in Section 2 for estimating the number of endmembers (VD and HySime), identifying the endmember signatures (OSP-GS and N - FINDR), and estimating the abundances (ULS and ISRA).

However, power increased much more rapidly in Table 2, which corresponds to a situation of complete congruence, with maximum power obtained when three or more CM were included in a replicate, regardless of matrix sizes (n).

Thus, the maximum active power obtained by the load is {P}_{Lmax }=frac{{boldsymbol{A}}^2}{omega_0}cdot Q (7) Fig. 4 Normalized active power PL as a function of k12 and Q L. LEGEND: The abscissa axis is the coupling coefficient k12 and the load quality factor Q L. They are two important parameters affecting the power.

For the whole range of parameters studied, the maximum power density obtained for SPSf/ZrP-42 SPSf/ZrP-42119was found to be 13% higher than that obtained for Nafion® 115 (105 mW cm−2).

Correspondingly, during the experiments performed on single direct ethanol fuel cells, the maximum power density obtained using PtSn/C + Ce/C (53 47) as the anode was approximately 60% higher than that obtained using the commercial catalyst.

The maximum power was obtained at 950 °C and 1.0 bar charge pressure as 118 W.

Maximum power density obtained in this study ranged from 28 to 70 mW/m3.

The stable maximum power density obtained from other nanotube coated cathodes varied from 174 mW m−2 to 522 mW m−2.