Sentence examples for maximum hardness obtained from inspiring English sources
In conformation test, maximum tensile strength and maximum hardness obtained are 822 MPa and 322 Hv, respectively.
The maximum hardness obtained from TiN/BON bilayer was 30 GPa.
The maximum hardness obtained at the outer periphery after heat treatment for Al 356 -SiC Al 356 -SiC)-SiC FGMMC and 155 BHN Ald 145 BHN respectively.
A value up to 1350 HV 0.025 constituting a maximum hardness was obtained.
The maximum hardness was obtained when the grain size of Ni matrix and Ni3P particle size were comparable.
The microhardness of Ti WC/WC TiN film on cemented carbide was measured to be 40 GPa and the maximum hardness was obtained as the period was approximately 7 nm.
'Wire-only hardness' obtained using Korsunsky model from composite hardness.
The hardness obtained using the nanoindentation method, however, was higher than the corresponding micro Vickers hardness.
Maximum hardness value was obtained from Ta-containing coating.
The maximum hardness, 27.6 GPa, was obtained for the TiAgN/W2N nanoscale multilayered coating with modulation period of 2.0 nm, which is an increase of 72.5% over the rule of mixture hardness value (16.0 GPa) of TiAgN and W2N coatings.
A nitrogen diffusion layer thickness of 40 μm and a maximum hardness of 1400 HV50 were obtained without a compound layer on top of the nitrided SKH57 by treating for 60 min at 450 °C in Ar N2 plasma.
