Sentence examples for maximum of tensile from inspiring English sources

The results showed that the optimum parameters to get a maximum of tensile strength were 920 rev/min, 78 mm/min and 7.2 kN, where the maximum of tensile elongation was obtained at 1300 rev/min, 60 mm/min and 8 kN.

This local minimum does not appear if isotropy is assumed [22], which is why in the models of Tersoff et al. [14] and Liu et al. [15], there is simply a maximum of tensile strain above a buried QD.

In view of the multi-objective optimization, two new fitness functions, tensile modulus and tensile strength (the minus sign indicates finding the maximum of tensile modulus and tensile strength in optimization process), are to be optimized.

The minimum of hydrophilicity and the maximum of tensile strength was obtained by maximization of clay and minimization of plasticizer in the considered range, which resulted in minimum transparency.

The maximum amount of tensile resistance for epoxy grouting is inquired from the manufacturer.

Because of the importance of the extrema, more emphasis is given to the maximum magnitudes of tensile and compressive radial strains.

The UL films with 1.20 of NCO/OH molar ratio exhibited the maximum value of tensile strength (σb=30.2 MPa εb=152%).

The maximum values of tensile strength and elongation at break were both more than 4 times larger than that of neat CS/GP hydrogel.

The maximum improvement of tensile strength, Young's modulus and hardness for the PMMA-5-PS nanocomposites over PMMA-5-PE is estimated to be 8, 2 and 26 %, respectively.

The results of spectral analysis in two X and Y directions for earthquake with 475 years period time show that the structure is resistant against used earthquake spectra well, just in some very small parts in the lowest part of dome, the maximum amount of tensile stress exceeds the allowable stress, 170 KN/m2.

The parameters used are the maximum stress of tensile steel (σmax) to the yielding strength (fy) ratio, as well as the axial rigidity of longitudinal steel (ks) and FRP (kf) reinforcement.