Sentence examples for maximum integration time from inspiring English sources

The lower values correspond to the maximum integration time of 20 s while the higher values correspond to an integration time of 1 s.

For many samples that fluoresce (e.g. indigo), 1 s was the maximum integration time that could be used without saturating the sensor.

Only in cases when fast moving objects are observed with the camera, to reduce the motion blur, the maximum integration time is set to a lower value depending on the object speed.

Five factors were considered, the five impedance spectroscopy measurement parameters: maximum integration time; minimum number of integration cycles; number of stabilization cycles; maximum stabilization time; and minimum cycle fraction.

If the wanted video level after the sensor at Point A from Figure 7 cannot be reached due to exceeding the control range (maximum integration time or maximum lens opening), the remaining video level gap is compensated the same way as explained in the sequential control.

The integration time step was Δ t = 10-3, maxintegrationatime time was 100 s.

Effectively, Δf M corresponds to a frequency resolution limit in MR and Δτ M is the maximum coherent integration time.

For instance, for a 0.75-m wavelength, the maximum coherent integration time increases from 0.16 in MR (aspect angle rate 0.4°/s) to 19 s in FSR.

Examples of the calculated fluctuation spectra bandwidth Δf M and maximum coherent integration time Δτ M for UAV "Predator" (wingspan D = 12 m) are presented in Table 3 for different wavelengths and aspect angle variation rates it should be noted that the 3-m wavelength situation may not be expressed exactly by Equation (8) as it is not an optical case.

Alternatively, one could also set a maximum allowable integration time and penalize the associated parameter values upon violation, as described above.

Signal-to-noise consideration, within the interval of possible dimension of the instrument parameters, allows us to constrain the telescope receiving area and to derive maximum range achievable, integration time and the final spatial and temporal resolutions of backscatter profiles.