Sentence examples for maximum insertion loss from inspiring English sources

The proposed GWOR matrix achieves low values of the insertion loss (i.e. maximum insertion loss IL=0.2 dB) and crosstalk below −15 dB.

The designed six electro-optical logic gates with the operation speed of 10 Gbit/s have a minimum extinction ratio of 35.6 dB and a maximum insertion loss of 0.21 dB for transverse electric modes at 1.55 μm.

"Off-the-shelf" DWDM communication products are used for analysis; as a result, the main insertion loss in the system comes from circulators while the maximum insertion loss deviation comes mainly from FBGs and micro-mirrors.

In addition, the measured maximum insertion loss and return loss in the passband, from DC to 2.04 GHz (93% of the passband region) are 0.2 dB and 17 dB, respectively.

This filter provides a 3 dB fractional bandwidth of 30.33% and maximum insertion loss of 1.3 dB at the center frequency 0.36 GHz with a compact size of 0.125 λg × 0.085 λg (4.1 × 2.78 cm2.78

Maximum insertion-loss at about 80% of the passband is 0.1 dB.

When the device acts as an optical drop multiplexer, the channel spacing is about 1.5 nm, maximum extinction ratio is 23.75 dB, the minimum insertion loss 9.94 dB and the maximum adjacent channels crosstalk is −12.12 dB.

When the device acts as an optical drop multiplexer, the minimum insertion loss is 4.481 dB and the maximum extinction ratio is 31.931 dB.

When the device acts as an optical add multiplexer, the maximum extinction ratio is 28.72 dB and the minimum insertion loss 7.35 dB.

The minimum insertion loss including the transmission loss and coupling loss is about 10.7 dB.

Measurement results indicate that the designed LPF has many good performances such as relative low insertion loss (maximum 0.59 dB) in passband, ultra-wide stop-band characterized by 20 dB insertion loss (from 2.45 to 25 GHz) as well as steep rejection with sharp transition band (2.15 2.45 GHz) out of band.