Sentence examples for required insertion loss from inspiring English sources

In order to reduce the eccentricity values for the required insertion loss, the Taguchi method is first used to simplify the optimization problems of the injection molding process.

Angiograms, on the other hand, require insertion of a catheter through a blood vessel in the groin, a longer procedure that carries a risk of more immediate complications.

Filters require narrow bandwidths, low insertion loss, and good rejection of unwanted signals.

Switches need good insertion loss, fast actuation, and sufficient isolation.

The microring resonator (MRR) switches with N≥1 reveal favorable boxlike flat spectrum as when compared with the simple device with only one microring (N=0), and 1≤N≤5 is required for obtaining <∼5 dB insertion loss under cross state (U=0 V).

Grating-based few mode fiber lasers effectively reduce insertion loss but require high fabrication accuracy and prohibit any change of launch characteristics arising from environmental factors such as bends and strain [23].

Optical insertion loss is another issue that requires attention to both material design and device structure.

The drawback to these voltage based systems are the inefficiencies or "insertion loss" of the audio transformer(s) that are required at each speaker.

It has 1.5 dB insertion loss and 45 dB attenuation range, and requires <8 V driving voltage to sweep the whole attenuation range.

Additional advantages are that the demultiplexer does not necessarily require bending waveguide sections as in a conventional AWG (de multiplexers, and thus yields highly compact devices with potentially very low insertion loss.

The average insertion loss was calculated using.