Sentence examples for maximum extrusion force from inspiring English sources

Several parameters, including briquetting time, energy consumption, maximum extrusion force, product compressive strength, and product density, were tested and recorded.

Finally, effects of raw material particle size on the briquetting process, energy consumption, maximum extrusion force, product compressive strength, and product density were obtained.

Three different coating ratings are generated based upon maximum extrusion force, standard deviation of the force, and the characteristic shape of the extrusion curve.

The mean maximum extrusion force of the macro-textured press-fit cup Metallsockel CL was 3824.6 N (max. tilting moment 95.6 Nm) in bone with normal and 2246.2 N (max. tilting moment 56.2 Nm) in osteoporotic bone.

The mean maximum extrusion force of the threaded cup Zintra was 5670.5 N (max. tilting moment 141.8 Nm) in bone with normal density and.5748.3 N (max. tilting moment 143.7 Nm) in osteoporotic bone.

The extrusion force was measured for all the dies tested.

The influence of die angle, reduction ratio and die land on the extrusion force during the extrusion process was investigated.

The requirement extrusion force decreased with the fillets and channel angle increase in ECAE die.

The required extrusion force drops with increasing the fillet made at outer corner in ECAE die.

The extrusion force required is reduced approximately 15 ton by employing the die angle 60°.

The study has shown that the extrusion force at steady state increased with the extrusion rate and with the number of layers.