Furthermore, if influx exceeds the maximal extrusion rate, Na+ accumulates in the cytosol, thus partially dissipating its transmembrane gradient.
Non-dimensional scaling laws were derived to predict the maximum extrusion rates associated with the indentation mechanism.
Once the separation performance reaches maximum (critical point), the rejection decreases with increasing dope extrusion rate, observed possibly due to formation of less tighten outer skin structure at high dope extrusion rate.
It shows that the non-dimensionalised values of the specific coring pressures, Pc/ϕ, and maximum extrusion pressures, Pmax/ϕ, depend primarily on the die angle, loading rate and total reduction in area of the cross-section of the complex-shaped section.
Three different coating ratings are generated based upon maximum extrusion force, standard deviation of the force, and the characteristic shape of the extrusion curve.
The selectivity of the solid polymer (the maximum selectivity achievable by any membrane if coating is highly effective or if no surface pores are present) was found to increase with increasing dope extrusion rate.
At fixed extrusion rate, properties of as-spun fibres strongly depended on their collection rate.
We compared the extrusion rate between EP and PP in our dry eye clinic.
Several parameters, including briquetting time, energy consumption, maximum extrusion force, product compressive strength, and product density, were tested and recorded.
The study has shown that the extrusion force at steady state increased with the extrusion rate and with the number of layers.
