Sentence examples for floor surface temperature from inspiring English sources

The numerical floor surface temperature and the heat flux are in agreement with the measured results.

The absolute error between simplified calculation and experiment results of floor surface temperature is within 0.4 °C.

For these reasons, heat flux and floor surface temperature distribution should be examined at the design stage.

In the cases of simulation, a maximum difference of 20% was observed for the floor surface temperature.

Nevertheless, the solar floor heating system configuration with storage tank does not achieve the desired floor surface temperature of the Hammam.

The effects of different envelope structures of glazed enclosed patios on floor surface temperature using a radiant floor heating system have been analyzed.

The predictions agree quite well with experimentally measured data for floor surface temperatures between 25 and 28 °C, supply air temperatures between 14 and 18 °C and air change rates from 3.1 to 4.5.

Orchard floor minimum surface temperature differences as high as 2 °C have been reported between bare soil and 5-cm high grass.

Three parameters, cooling/heating capacity of radiant floor, uniformity of surface temperature distribution, and the lowest temperature in surface, are concerned most by designers and users of radiant floor.

From the in situ temperature record during the firing (Figure 2), it is clear that the floor surface samples experienced high temperature of approximately 1,000°C while the −20-cm level samples were only exposed at low temperature, at most approximately 350°C.

Moreover, while the heat transfer coefficient of the radiant floor was a constant, the surface temperature of the radiant floor changed with the heat released from different fuels was consistent with exponential variation form.