Sentence examples for temperature reduced by from inspiring English sources

The incipient temperature reduced by 13.72 23.18%.

When the entanglement density of the matrix was increased and its glass transition temperature reduced by copolymerization, there were significant increases in the crack initiation and propagation resistance of the particle-toughened materials at low to intermediate speeds.

The results of this study show that in the hybrid air conditioning system for using the indirect evaporative cooler with internal baffle as a pre-cooling unit, the supply air temperature reduced by 21% and the coefficient of performance improved by 71% as compared to previous designs of the hybrid air conditioning system at the same inlet conditions.

Fifty to 100 ng of genomic DNA was amplified by the following touchdown PCR protocol, with annealing temperature reduced by 1°C per cycle from 65° to 56°C followed by 35 further cycles at 56°C as described above.

PCR conditions were as follows: 3 min at 95°, 12 cycles of 30 sec at 94°, 30 sec at 60°, and 45 sec at 72°, with annealing temperature reduced by 1° each cycle, followed by 32 cycles with annealing temperature held constant at 52°, and a final extension time of 20 min; the primer sequence for each marker can be found at http://www.mimulusevolution.org.org

PCR conditions in the first cycle were 94°C for 10 sec, 65°C for 30 sec, and 72°C for 2 min with the annealing temperature reduced by 0.4°C for 12 cycles, then 30 cycles of 94°C for 10 sec, 56°C for 30 sec, and 72°C for 2 min. Semi-automated analysis of the selective PCR products was performed on MegaBACE 1000 DNA sequencing system (GE Healthcare).

Although this site information was limited, it should be noted that an important environmental variable, mean temperature, is largely controlled by latitude and elevation, with mean temperature reducing by approximately 1°C for every two degrees increase in latitude, and for every 200 m increase in elevation.

Depending on location, peak temperatures reduce by 8 16 °C at the hottest time of year.

Experimental results show that the peak temperature is reduced by 4.8°C compared to current approaches and the temperature variance is reduced to 42% of the initial temperature variance.

Under the normal heating operation for 2.5 h, 10 L hot water with a temperature of 30 °C was obtained, the compressor casing temperature was reduced by 4.6 °C.

The initial annealing step was 20 sec at 64°C for one cycle and subsequently the temperature was reduced by 1°C for every cycle until a final temperature of 55°C was reached.