Sentence examples for set flow rate from inspiring English sources

In addition, it's only required to set flow rate threshold of edge ports (i.e. the switch ports directly connecting to IED equipment), and don't need to set link up port.

The volume flow is measured at the pump outlet and has an accuracy of 0.1% of set flow rate between 0.06 and 3000 ml/h.

The set flow rate was 1 ml/min.

After reaching the set flow rate and the maximum nitrogen concentrations, the reactor temperature was decreased to 30 °C, and then 25 °C.

The concentrator had three parallel sampling lines (concentrators) that simultaneously collected fine PM, each at a set flow rate of 110 L/min.

All experimental runs resulted in a gradual increase in soil loss volume, incision depth, and retreat distance over time due to set flow rates.

The pump (P625/900, Instech, Plymouth Meeting, PA) and tubing combination provided set flow rates (μL s−1) which allowed for calculation of the time necessary to actuate the pump to fill a known section of tubing with fluid.

A syringe driver (Alaris, Carefusion, San Diego, California, United States) serviced and calibrated in February 2013, was used to deliver set flow rates in 100 ml.hr-1 increments up to 1000 ml.hr-1 or until the pressures measured exceeded the limit of 360 mmHg.

Set the flow rate at 250 nl/min.

The FPLC system was set at flow rate of 1 mL/min.

4. Connect the LUX Cellulose-1 column and set the flow rate to 0.2 ml/min.