nominal depth

USAGE SUMMARY

The phrase "nominal depth" is correct and usable in written English.
It is typically used in contexts such as engineering, architecture, or marine studies to refer to a standard or average depth measurement. Example: "The nominal depth of the pool is set at 2 meters to ensure safety and compliance with regulations."

✓ Grammatically correct

Science

Engineering

Construction

Human-verified examples from authoritative sources

Exact Expressions

11 human-written examples

The grout curtain, compared with that of the Aswan High Dam, is of nominal depth.

Britannica

After detailed surveys and analyses of the permafrost conditions along the pipeline route, a conventional burial construction mode at a nominal depth of 1.5 m was adopted.

Cold Regions Science and Technology

The morphology of the films was analysed by SEM while the composition gradients were measured by SIMS, XPS and RBS, confirming preset nominal depth composition profile of the films.

Vacuum

The pipeline, transporting mostly diesel, motor and aviation fuels at ambient temperatures, is 159 mm in diameter, has a wall thickness of 6 mm and was buried in a trench at a nominal depth of between 1.2 and 1.4 m.

Cold Regions Science and Technology

In this work, the cutting velocity and the nominal depth of cut are fixed as 20 m/s and 2 nm, respectively.

Nanoscale Research Letters

In the conventional macroscopic machining where the edge radius of cutting tool (i.e., tool sharpness) is significantly smaller than the nominal depth of cut, the work piece is usually considered to be composed of continuous, isotropic, and defect-free materials.

Nanoscale Research Letters

Human-verified similar examples from authoritative sources

Similar Expressions

49 human-written examples

Figure 6e shows 2P-TRPL decay curves at three representative nominal depths: at the surface (Δz = 0 μm, τs = 0.73 ns), within the transition region (Δz = 1.0 μm, τs = 1.2 ns), and below the transition region (Δz = 4.5 μm, τs = 1.8 ns).

Nature

Using the engineered dielectric liquid HFE-7100 as the working fluid, experimental results are presented for channel mass fluxes of 1300, 2100, and 2900 kg/m2 s and channel cross sections with nominal widths of 15 μm and nominal depths of 35 μm, 150 μm, and 300 μm.

International Journal of Heat and Mass Transfer

Monthly fluxes and hourly temperatures and currents were recorded at 500 m (30 m above bottom, mab) in the canyon heads, at 500 and 1000 m (respectively 530 and 30 mab) nominal depths at the mid-canyon sites, and at 750 m (30 mab) open slope.

Marine Geology

The subsurface mooring is equipped with physical sensors at different nominal depths (2, 15, 120, 350, 550, 750, 900, 1000, and 1200 m) and acoustic current profilers located at 320 m and 1200 m.

Open Geospatial Data, Software and Standards

Nominal depths for stimulating and recording electrodes were 2.2 and 3.5 mm below dura, respectively, but optimal depth placement was achieved through electrophysiologic monitoring of the response evoked in the dentate gyrus after single-pulse perforant path stimulation.

Environmental Health Perspectives

Expert writing Tips

Best practice

When using "nominal depth" in technical documentation, ensure you also provide the tolerance range or acceptable deviation to avoid ambiguity. This is particularly important in engineering and construction contexts.

Common error

Avoid using "nominal depth" interchangeably with the actual measured depth. Always clarify if you are referring to the intended design value or the real-world measurement, especially in reports where precision matters.

Linguistic Context

The phrase "nominal depth" typically functions as a noun phrase acting as an adjective modifying another noun. Ludwig AI indicates that the phrase is generally used in technical contexts to specify a standard or intended measurement.

Expression frequency: Common

Frequent in

Science

80%

Engineering

10%

Encyclopedias

10%

Less common in

Formal & Business

0%

News & Media

0%

Wiki

0%

Ludwig's WRAP-UP

The phrase "nominal depth" is a common term, especially in scientific and technical fields, used to indicate a standard or intended measurement rather than an exact, real-world value. Ludwig AI confirms its correctness and usability in written English. It’s important to understand its context and potential for variation, as highlighted in the writing guidance. As "standard depth" or "approximate depth", among others, may serve as effective alternatives depending on the nuance required. In summary, "nominal depth" is a useful and precise term when used correctly, particularly in technical and scientific documentation, where accuracy and clarity are paramount.

More alternative expressions

Phrases that express similar concepts, ordered by semantic similarity:

rated depth

Focuses on the depth a device or system is designed or certified for, differing from "nominal depth" which is more general.

designated depth

Highlights the specified or assigned depth, making it suitable when emphasizing a planned or official measurement.

standard depth

Emphasizes a generally accepted or common depth, which is useful when referring to industry norms or typical measurements.

approximate depth

Indicates that the depth is not precise but close to a specific value, suitable when precision is not critical.

theoretical depth

Implies that the depth is calculated or estimated based on a model or theory, differing from an actual measurement.

average depth

Refers to the mean depth value over a given area or set of measurements, often used in statistical contexts.

typical depth

Describes a depth that is commonly encountered or expected, fitting well when discussing common scenarios.

specified depth

Highlights a depth that has been explicitly indicated or prescribed, typically used in technical specifications.

stated depth

Indicates a depth that has been declared or communicated, often used in reporting or documentation.

nominal value for depth

This alternative uses a more verbose structure, explicitly stating that the nominality applies to the depth value.

FAQs

How to use "nominal depth" in a sentence?

The "nominal depth" refers to a standard or intended measurement. For example, "The pipeline was buried at a "nominal depth" of 1.5 meters."

What does "nominal" mean in the context of "nominal depth"?

In the context of "nominal depth", "nominal" means approximate or named. It refers to the standard or intended value, which may differ slightly from the actual measured depth.

Is there a difference between "nominal depth" and "actual depth"?

Yes, "nominal depth" refers to the intended or designed depth, while "actual depth" is the measured depth, which can vary due to construction tolerances or environmental factors.

What are some alternative phrases for "nominal depth"?

Depending on the context, you can use alternatives such as "standard depth", "designated depth", or "approximate depth".