Sentence examples for mixture rule for from inspiring English sources

To verify the empirical mixture rule for TSI, the TSI values of several binary mixtures of candidate surrogate components were measured.

To assess the assumptions behind the two phase mixture rule for reacting explosives, the shock-to-detonation transition process was calculated for high explosives using a finite difference method.

Considering a top-down approach, i.e. from the largest to the smallest scale, we propose a recursive micromechanical model coupled with a generalized fractal mixture rule for the prediction of hardness and toughness of a grained material with n hierarchical levels.

The MAC of a homogenously mixed solution can be approximated by Hubbell's weighted average mixture rule for homogenous solutions with photon energies >10 keV [9]: {mu}_{mathrm{M}left(mathrm{soln}right)}={displaystyle {sum}_i{mu_{mathrm{M}}}_{(i)}}{w}_{(i)} (1).

Finally, the hardness of the binder phase in these coatings was estimated to range from 1000 to 1300 Hv by applying the mixture rule for composites to the experimental data, demonstrating that such hardening of the binder phase is a key factor affecting the mechanical properties of the coatings.

In an effort to accounting polar mixtures, Avlonitis et al. (1994) proposed a novel mixing rule for mixtures containing polar (asymmetric) components as follows: a = a^{text{C}} + a^{text{A}} (16 where superscripts C and A stand for classical (nonpolar) and asymmetric contribution of attractive term.

Using the new parameters, the predictive SRK model (group contribution mixing rule for the mixture parameters a and b of SRK EOS) is employed in this work to calculate the liquid density of binary mixtures.

The Böttcher mixing rule for the relative permittivity and the Oster rule for the mixture polarity showed the best agreement with the experimental data, with root-mean square (RMS) deviations smaller than 1%.

The Le Chatelier's mixing rule for the LFL is the prevailing method for estimating the LFLs of mixtures with multiple flammable components.

Mole fraction of species i. Mass fraction of species i. Mixture rule constant for species i in species j.

Figure 2 shows a comparison of LAC with increasing GBCA concentration for the mixture rule (Eq.2) and resulting LAC from CT scanning (bi-linear conversion from HU to LAC at 511 keV).