Sentence examples for mixed lubrication condition from inspiring English sources

It is found that the lubricating film is so thin that the contact is within the mixed lubrication condition much of the time, and at times descends into the boundary lubrication zone.

The specimens were tested against a rotating high speed steel counter-disc using a pin on disc apparatus under mixed lubrication condition.

A prediction model of the friction coefficient and wear of the spiral bevel gears in the mixed lubrication condition is proposed.

This paper proposes a physics-based model to predict the micro-pitting behavior on contact surfaces of spur gears operating under the mixed lubrication condition.

A fatigue methodology for pitting crack nucleation is proposed for non-conformal point contacts under mixed lubrication condition where asperity contacts are prominent.

The effect of shot peening on rolling contact fatigue (RCF) and lubricant film thickness within non-conformal rolling/sliding contacts operated under mixed lubrication conditions was observed in this study.

Normal vibrations are developed during sliding of a bearing working under mixed lubrication conditions.

It can be suggested from the obtained results that properly designed surface texturing could help to increase the separation of rubbing surfaces under mixed lubrication conditions.

In this study, a CrSiN thin film was deposited on the cylinder barrel surface in order to improve its tribological contact with the valve plate under low-speed mixed lubrication conditions.

The valve train is one of a key system of the combustion engine considerably contributing to frictional losses, especially under boundary and mixed lubrication conditions at lower crankshaft speeds.

Factorial experimental design was used as the basis for a systematic evaluation of wear rates under mixed and boundary lubrication conditions.