Sentence examples for minimum fluidization velocities from inspiring English sources

Minimum fluidization velocities at other temperatures were determined from an analogous graph, and summarized in Table 3.

It is shown that there is no significant difference between the minimum fluidization velocities, the simulation and measurement results are very close to each other all the time.

Experimental measurements were performed of the minimum fluidization velocities and the terminal velocities of a bed of dolomite and its calcine.

It is found that the predicted minimum fluidization velocities are consistent with the correlation given by Abrahamsen and Geldart for all cases that we studied.

The influence of the magnitude of the cohesive interparticle force on fluidization characteristics is analysed in terms of the change in the ratio of the minimum bubbling to minimum fluidization velocities.

The knowledge of the segregation direction can be combined with a comparison of the pure components' minimum fluidization velocities yielding, although only under the complete segregation hypothesis, a prediction of the different segregation/fluidization patterns.

Minimum fluidization velocity, fluidizing behavior and adsorption/desorption properties of the sorbent particles were determined in a laboratory scale fluidized bed reactor (i.d., 0.03 m) in the temperature range up to 1073 K.

In the case of the fluidized bed, the minimum fluidization velocity (0.086 m/s) and minimum bubbling velocity (0.12 m/s) were also identified on the basis of the well-pronounced local minima in the profiles of the new parameters.

A predicting correlation for the minimum fluidization velocity in a supercritical water fluidized bed was obtained based on the experimental results of a fixed bed and the fluidized bed pressure drop.

The value of minimum fluidization velocity of the pilot-scale bubbling fluidized bed combustor is approximately obtained to be at around 1.0 m/s.

The minimum fluidization velocity, fluidization terminal velocity, and average fluidizing velocity were calculated, in order to understand the fluid-dynamic behaviour of gasification of this fuel.