Sentence examples for minimum fluidizing velocities from inspiring English sources
In this relationship, UF and UJ are the minimum fluidizing velocities of the flotsam and jetsam components respectively, dR is the particle diameter ratio of the jetsam relative to the flotsam and Db is the bubble diameter at the take-over velocity.
The results indicated that a lower bed pressure drop (without considering lower gas velocity in a fixed bed stage) and higher minimum fluidized velocity are achieved with increasing agitation speed.
Minimum fluidization velocity, fluidizing behavior and adsorption/desorption properties of the sorbent particles were determined in a laboratory scale fluidized bed reactor (i.d., 0.03 m) in the temperature range up to 1073 K.
Minimum fluidizing velocity (m s-1).
In the case of the fluidized bed, the minimum fluidization velocity (0.086 m/s) and minimum bubbling velocity (0.12 m/s) were also identified on the basis of the well-pronounced local minima in the profiles of the new parameters.
A predicting correlation for the minimum fluidization velocity in a supercritical water fluidized bed was obtained based on the experimental results of a fixed bed and the fluidized bed pressure drop.
The value of minimum fluidization velocity of the pilot-scale bubbling fluidized bed combustor is approximately obtained to be at around 1.0 m/s.
The influence of pressure on minimum fluidization velocity has been measured in a pressurized fluidized bed.
The four superficial gas velocities of 0.5, 1.0, 1.25 and 1.5 m/s used in these CFD investigations are compared to the experimentally measured minimum fluidization velocity obtained from the pilot-scale bubbling fluidized bed.
The predicted simulation results of minimum fluidization velocity and pressure drop values of the pilot-scale bubbling fluidized bed combustor have good agreement with the experimental measurements.
The resin was sieved into five different narrowed particle size fractions and fluidized at two different gas velocities; 1.5 and 4 times the minimum fluidization velocity (umf) representing the bubbling and the slugging flow regimes.
