Sentence examples for method the electrical from inspiring English sources

By this method, the electrical percolation threshold decreases and the electrical conductivity increases significantly as compared to composites with well-dispersed SWCNTs.

In EEOR method, the electrical field (direct current) is directly applied to the reservoir between a cathode (usually installed in the production well), and anodes (usually installed in injection wells) (Wittle et al. 2011) as shown in Fig. 1.

The results show that using the grey relational Taguchi method, the electrical resistivity of AZO films is reduced from 6.2 to 3.4 × 10− 3 Ω-cm and the visible range optical transmittance is changed, from 88.7 to 88.8%.

The density was determined by the pycnometer method; the electrical conductivity using a conductivimeter; the thermal diffusivity by a method based on the analytical solution of heat diffusion equation; the specific heat capacity by a modified method of mixtures; and the thermal conductivity from the knowledge of other properties.

Using this fabrication method, the electrical contacting of the Bi sensing element is directly established during the deposition process.

Among geophysical methods, the electrical resistivity tomography (ERT) method is one of the most commonly used for the study of hydrodynamical processes.

This non-invasive method determines the electrical impedance, or opposition to the flow of an electric current through body tissues to calculate an estimate of total body water, fat-free body mass and body fat [ 47].

A combination of the electromagnetic method and the electrical resistivity gave a higher rate of 90% as opposed to 82% by the electromagnetic method and the 85% by the resistivity method (White 1986).

The controlling method of the electrical charge of the droplet to be developed should meet the following requirements: (i) the method must not hinder a pipetting procedure to transfer an accurate volume of liquid; (ii) the method must not cause the change of the constituents of the liquid to be transferred.

Besides, the SSC method employs the electrical network to control the growth rate.

Using the PMOR method proposed, the electrical sub-system is reduced from order 1,122 to order 68, the thermal system is reduced from order 8,071 to order 606, and the speedup factor for the electro-thermal simulation is 7.2.