Sentence examples for method of vacuum from inspiring English sources

These recommendations allow to meet the imposed constrains to precision of details production with method of vacuum infusion.

In this paper, a simple and fast fabrication method of vacuum assisted resin transfer molding (VARTM) method for hybrid fiber reinforced thermoplastic (HFRTP) was introduced.

Ti Zr N coatings were formed by the method of vacuum arc deposition using combined Ti and Zr plasma flows in a N2 atmosphere at different ratios of arc currents of Ti and Zr cathodes.

In this work, VO2 thin films have been prepared by the method of vacuum evaporation combined with vacuum deoxidation and irradiated by electron beam with fluence of 6.3×1016 cm2 and energy of 1.7 MeV, and then have been annealed at different temperature after irradiation.

In the long-term, the main elements of carbon management will be carbon capture and sequestration; carbon dioxide utilization to create new fuels (carbon dioxide plus sunlight plus water equal hydrocarbon fuel); and some new method of "vacuum cleaning" the atmosphere to remove excess carbon dioxide, the principal greenhouse gas.

Cultures were collected by a method of vacuum drum filtration, and 0.5 g vegetative mycelia were added into the above inducing medium.

From the results of the study, it is concluded that the methods of vacuum drying and plasma pre-treatment are more effective alternative to chemical processing of the coconut lumber sawdust in the adsorption of dye in wastewater.

The new alloy presented by Mannan et al. [47] with nominal composition Fe-47Ni-20.5Cr-3Mo-2Cu-3Nb-1.5Ti was develofed by thomogenizedf homogenized vacuum induction melting.

In this regards, the method of VARTM (Vacuum Assisted Resin Transfer Molding) was used in order to achieve a laminate without any fault.

Microeciella suborbicularus has also been recently distinguished from O. lobulata and O. dilatans, using this modern method of low vacuum scanning, with which it has been inaccurately synonymized with in the past.

In the experimental implementation of the metallic and dielectric layers deposited on the PC substrate, the method of high-vacuum plasma-assisted deposition was used and both the metallic layer Al and dielectric layer ZnS-SiO2 films were deposited sequentially under the conditions of Class 100 cleanroom.