As a result, we observe a good agreement between the efficiency predicted with the thermal measurements (less than 5% of error) when compared to values measured with standard electrical equipment.
Depression, irritability, and impulsivity were measured with standard psychiatric instruments.
The IFN-γ in the supernatant was measured with standard ELISA.
Results show that the sedimentation values measured with standard and new methods provided fairly good correlations.
Excellent agreement with previous results in the literature, measured with standard techniques, was obtained.
When the transmitted SNR is above 8 dB, the performance of the algorithms measured with standard deviation of received SNR is almost identical.
Some chemical properties of pre composted cow manure and leaf meal were measured with standard methods and are presented in Table 1.
Experiments were performed in a He3 cryostat and the four-terminal magnetoresistance was measured with standard phase-sensitive lock-in techniques.
That is, the material parameters needed for the analysis are limited to invariant material properties that can be measured with standard test methods.
Typical current vs. pH response measured with standard buffer solutions (pH 4.0, 7.0, and 9.0) was in the range of 15 to 20 μA/pH, which gives us primary pH sensitivity estimation of approximately 50 mV/pH.
Fracture roughness is quantified as joint roughness coefficient (JRC), and JRC was determined by a visual comparison of fracture profile measured with standard roughness profile suggested by Barton and Choubey (1977).
