Sentence examples for maximum wall temperature from inspiring English sources

The maximum wall temperature in stand-by mode is below 393 K.

The results indicated that the maximum wall temperature of the DPF increased with increasing 'L/D' in 'high speed mode'.

The maximum wall temperature of wall re-heater is about 35 K lower than that of the spiral wall heater.

It was found that even the wall heat flux was up to 1500 W/m2, the maximum wall temperature was lower than 350 °C.

Increasing the air speed of the branch tube nozzle could reduce the maximum wall temperature and enhance surface temperature uniformity; but these effects were relatively not significant.

The calculated exit bulk temperature of subcooled coolant and the maximum wall temperature at OFI show a maximum deviation from experiment of 12 and 7%, respectively.

Furthermore, the maximum wall temperatures were investigated, which is a key parameter for the fuel's integrity during some accidents.

For the considered Rayleigh number, the difference between the highest and the lowest maximum wall temperatures increases with increasing the channel aspect ratio.

The comparison among the maximum wall temperatures shows that the simple channel is the most critical configuration at steady state condition, but it is the best configuration during the transient heating at the first overshoot.

In the range of parameters investigated, increases in differences between inlet and maximum wall temperatures up to 200 K are shown to have small influences on the flow field and negligible effects on heat transfer performances.

Then, the values of maximum heat flux are used to assess corresponding variations of pressure drop and maximum bottom wall temperature of the heat sink.