Sentence examples for maximum strength values from inspiring English sources

The maximum strength values and respective standard deviation are shown in Figure 10.

Maximum strength values and standard deviation associated with each test are shown in Figure 6. Figure 6 Adhesive joint Leather/TR: maximum strength and standard deviation.

The calculated bond strength values were in a range of 12.6‒35.3 MPa as summarized in Table 2, being comparable to the maximum strength values reported in the literature for these resins (20‒70 MPa) [19].

A time-of-day effect for leg and back strength measurements was reported in one study in which maximum strength values increased consistently during daytime [ 67].

Maximal voluntary strength is evaluated by the 10-repetition maximum (10-RM) method for the following exercises: chest press, latissimus pulldown, knee extension, knee flexion, (Tuff Stuff, Pomona, CA) which will be used to calculate 1-RM (maximum strength) values for the exercise intervention [ 48].

The result was determined from the maximum strength value on the stress-strain curve.

Maximum tensile strength values and synergism for this blend has been observed.

The maximum tensile strength values of the networks were found to first decrease with increasing Mn, but to increase again at values above approximately 10,000 g mol−1, at which the networks started to show rubber-like behavior.

The maximum flexural strength values of the strengthened glass with thicknesses of 3, 4, 8, and 10 mm were 0.63, 0.68, 0.73, and 0.77 GPa, respectively, values that were 3.5 times higher than that of the parent glass.

The maximum leg strength values of 655 and 613 N for right and left legs, respectively was observed when the pedal was located at 55% stature in front and 10% stature below the SRP i.e. when the leg was in almost elongated position.

A maximum shear strength value of ∼119 MPa was achieved; this was found to be close to that of CP-Ti.