Sentence examples for maximum stress values from inspiring English sources

For the I-beam equations, failure was based on maximum stress values.

Physical characterization of the bioreactor hydrodynamics revealed significantly smaller maximum stress values in the ATF at similar mixing and oxygen mass transfer rates.

The maximum stress values on all surfaces induced by the particle embedment were estimated to verify the expected response to be close to the linear regime.

It is shown that in multi-layer sandwich coatings, the maximum stress values are lower, nevertheless, the most important role has the ratio coating thickness/edge radius.

Two scale-down models were developed operating under laminar and turbulent condition, generating repetitive oscillating hydrodynamic stress with maximum stress values ranging from 0.4 to 420 Pa, to compare the effect of the different flow regimes on the cells behavior.

Numerical results obtained, have shown that the 6000 bbl/day flow rate imposed predominant stress at the riser base by producing maximum stress values of 64 MPa, 63 MPa, and 68 MPa in the axial, transversal and lateral global directions of the flowline-riser cross-section, respectively.

As a result, maximum stress value can be considered as a design constraint effectively.

In general, the local stress keeps increasing before creep relaxation overwhelms the consequences of growth strains, and there are two distinctive regimes separated by an extreme point corresponding to the maximum stress value and transition time in the stress variation curve.

The compressive stress strain response of UHPC shows a linear elastic behavior up to 80 90 % of the maximum stress value.

The maximum stress value which appeared in the vertical imprint process was smaller than that of roller imprint.

The compressive stress strain curve of UHPC typically shows a linear elastic portion up to 80 90 % of the maximum stress value (Graybeal 2007; Cheyrezy 1999).