Sentence examples for maximum prediction error from inspiring English sources

The predicted beam failure loads were compared with experimental results, with the obtained maximum prediction error of 8.4% indicating good agreement.

The maximum prediction error for surface hardness is less than 1.6%.

The predicted temperature values were in good agreement with the experimental data with the maximum prediction error of 6 °C.

The developed model was validated with a new set of experimental data, and the maximum prediction error of the model was less than 7%.

The results of the model have been compared with the experimental data of the pilot plant showing a maximum prediction error of 9%.

The simulated outlet temperatures of particulate foods had a good agreement with experimental data within the maximum prediction error of 4%.

The maximum prediction errors for SR1, SR2 and SR3 are, respectively, 12.1, 28.7 and 12.4%.

The maximum prediction errors for SC1, SC2 and SC3 are, respectively, 11.1, 12.7 and 27.5%.

They do not, however, allow prediction of individual values, with maximum prediction errors ranging between approximately 30 60% force across sampling areas.

Up to a spindle speed of 70,000 rpm, the maximum prediction errors in stability boundary for a 500 µm diameter end-mill using constant and velocity chip load dependent cutting coefficients are ~33%and~11%1%, respectively.

The curves used to predict the wind generation by eight wind farms and the actual power curves are shown in Appendix 1, and assume that the maximum allowable prediction error ΔP is ±0.05 p.u.