Sentence examples for maximum deformation at from inspiring English sources

(delta_{irm{max} }) is the maximum deformation at any time during the operation.

The profiles of maximum deformation at impact locations were compared in Fig. 16.

It can be seen that the magnitude of the maximum deformation at location "A" due to strike of aircrafts was the smallest, while locations "B" and "C" experienced the highest displacement.

This study uses ANN and IP together to determine the mechanical properties of concrete, such as the compressive strength, modulus of elasticity and maximum deformation, at a certain success rate.

The validated finite element model was then used to perform a comprehensive set of parametric studies to investigate the effects of different design parameters on the connected plate behaviour, including initial stiffness, ultimate resistance and maximum deformation at the ultimate resistance.

A validated finite element model has been used to perform a comprehensive set of parametric studies to investigate the effects of different design parameters on the connected plate behavior, including initial stiffness, ultimate resistance and maximum deformation at the ultimate resistance.

The maximum stress in gasket locates at the inner edge of the groove, and maximum deformation appears at the edge of the hole.

Besides, the maximum equivalent stress occurred at the inside of the feed opening, while the maximum deformation occurred at the conveyor blade edge of taper extremity.

The results show that the maximum thermal stress occurs at the bottom of the arc of the bushing, and the maximum deformation occurs at the arc top.

In addition, the maximum deformation occurred at the waist line of the two sides of roadway with accumulative deformation of 83.68 cm.

The maximum force, deformation at maximum force, strain at maximum force, stiffness, fracture energy, maximum stress at failure, fracture toughness, velocity of fracture initiation, fragility index, and velocity of crack growth as the SCB test outcomes or dependent variables (DV) were analyzed using RSM.