Sentence examples for maximum displacement at from inspiring English sources

Theoretically predicted maximum displacement at the top of the wall at impact was also found to be in good agreement with those obtained from experiments.

The maximum displacement at the crest of the nearest bench in the X and Y directions was 26 mm, which is acceptable in regard to open pit slope stability.

From this study, the following results are obtained: (1) the impact force time history, maximum displacement at the loading point and crack patterns caused in the side-surface of the arch beams can be simulated, which are in good agreement with the experimental results; however, (2) the damped free response after unloading and residual displacement cannot be better simulated.

a Maximum displacement at ¼ of span.

Equation 2 is used to define the deformation profile yielding maximum displacement at the mid node.

It is also observed that beam behaves in almost symmetrical manner with maximum displacement at location of removed column.

However in the specimen strengthened with unbonded strand, where all catenary force in the strand acts on the far face of the exterior column, the beam end was not separated from the column face even at the maximum displacement as can be observed in Fig. 19b.

Abutment and pile deformation plots highlight maximum displacements at the top of piles that are often only 1/3 to 1/2 of the values at the top of the abutment.

A parametric study – as a function of contact stiffness and damping – is performed and results are given in terms of Poincaré sections, bifurcation diagrams and maximum displacements at steady state.

Results generated for two- and three-bay panels reveal that the single-panel model can drastically underestimate the maximum displacements at the structure, which is critical for structural design and fatigue-life estimation.

The inclusion of maximum displacements at incipient collapse helps develop insight into the response of the structure at incipient collapse.