Sentence examples for main channel at from inspiring English sources

Confederate artillery crews used the extra time to sharpen their aim by placing buoys in the main channel at precisely measured distances from the heavy guns of Sumter and Moultrie.

After DMSO was completely removed, S. typhimurium was pumped into main channel at 3 uL/s.

This is alleviated by the Syncil Dyke, which leaves the main channel at Bargate Weir and runs for 1.5 mile through the industrial areas to the south of the main city centre.

It used to rejoin the main channel at Stamp End, but was re-routed into the South Delph, a drainage ditch constructed by John Rennie in the early 19th century that joins the main channel below Bardney lock.

Blunt-snouted lenok spawned both in mountain tributaries (at 3 4°C) and in the main channel (at 5 7°C) of a second-order Amur tributary whereas sharp-snouted lenok spawned in the main channel only, typically in its more downstream reaches [ 29].

Their proposed weir-type device featured a barrier with height of 10  μm and 80  μm in width across the main channel at a small angle of 10°), which effectively allowed the passage of 99% of blood cells (erythrocytes, 6 8  μm; leukocytes, 8 10  μm) that passed through the barrier while impeding the CTCs (>10  μm).

The authors demonstrated that when the average SNR of the main channel is at medium and high levels, higher correlation at the receiver exerts more detrimental effects on secrecy than higher correlation at the eavesdropper.

For rectangular compound channels, the Dirichlet boundary condition, Ud = 0, was applied at y = 0 (the remote edge of the main channel) and at y = B (the remote edge of the floodplain).

Kathimerini reports: Syriza leader Alexis Tsipras appeared live on ERT's main channel, NET, at around 3 a.m. on Wednesday to voice his opposition to the closure.

The product of the blast furnace became known as pig iron from the method of casting, which involved running the liquid into a main channel connected at right angles to a number of shorter channels.

Similarly, ERROR_CMM should have high detection and low FARs when Jammer is on the main channel, while at least low FARs if it is on NACs and IACs.