Sentence examples for insert surface from inspiring English sources

This study of 55 early-generation acetabular inserts found that severe wear of the convex insert surface correlates with osteolysis.

In cementless acetabular arthroplasty, the interface between the metal backing and the ultra high-molecular-weight polyethylene acetabultra high-molecular-weighttential soultra high-molecular-weight.

Wear of the concave insert surface did not correlate strongly with osteolysis probably owing to prevalent micromotion and wear at the convex surface interface.

To visualize femorotibial contact, the proximity between surfaces of femoral component and tibial insert was calculated, and mapped onto the insert surface model.

All the attempts regarding modification of the insert surface preparation, nature or geometry did not improve the behavior of such anodes used in severe cyclic pressure conditions.

The Fish Scale (FS) profile is introduced on the insert surface to improve the convective heat transfer coefficient, for a constant heat transfer area.

The resulting damage is the well-known heat checking phenomenon, characterized by nucleation of a fine cracks network on die and insert surfaces.

During the physical vapour deposition (PVD) of coatings, the orientation of cemented carbides insert surfaces to the plasma flux direction affects the film thickness distribution on the rake and flank, which, in turn, might influence the wear propagation in cutting processes.

Considering the inserts' surface micro-structure and mechanical properties developed after the laser treatment, the coated tools' cutting performance deterioration or improvement compared to untreated substrates was explained.

Mode-II interlaminar fracture toughness of GFRP/Al (aluminum) laminates is improved by employing acid treatment to an Al plate and inserting surface modified vapor grown carbon fiber (S-VGCF) between the Al plate and a GFRP layer.

Briefly, astrocytes were seeded (3 × 10 cells/cm) on the bottom of collagen-coated Transwell inserts (surface area: 0.33 cm, pore size: 0.4  μm, Corning Incorporated, Corning, NY, USA) or 24-well plates 2 days before the bEnd.3 cells were seeded (4 × 10 cells/cm) inside the insert, on the upside of the membrane, and cultured to tight monolayers.