inlet hole

USAGE SUMMARY

"inlet hole" is correct and usable in written English.
You can use it to refer to a hole through which something is put into a larger space. For example, "The machine was connected to a water tank by a small inlet hole."

✓ Grammatically correct

Science

Wiki

Human-verified examples from authoritative sources

Exact Expressions

11 human-written examples

The diameters of the inlet hole and the actuating holes are 2 and 3 mm, respectively.

Micro and Nano Systems Letters

For upstream rim cavity, it is more effective to protect upper walls for the inlet hole at a higher radius, and the sealing effectiveness on inner walls is higher for the inlet hole at a lower radius.

International Journal of Heat and Mass Transfer

The bottom substrate includes a liquid chamber, an inlet hole, and a bump structure that functions as a restrictor during the dispensing process (Figure 1(b)).

Micro and Nano Systems Letters

Other design parameters of the dispenser were fixed: 100-μm height of chamber and outlet, 500-μm diameter of inlet hole, and 1000-μm 1000-μmr of bump structure.

Micro and Nano Systems Letters

Table 1 Summary of design parameters Design parameters Size (μm) Chamber Diameterr 2000  Height 100 Bump  Diameter 400  Height 80 Inlet hole  Diameter 200 Outlet nozzle  Width 100  Height 100.

Micro and Nano Systems Letters

We realized sample flow and antigen detection using this measurement chip mounted on SPR instrument with a simple procedure, which consisted of injecting a raw sample solution into the inlet hole using a mechanical pipette.

Sensors and Actuators B: Chemical

Human-verified similar examples from authoritative sources

Similar Expressions

49 human-written examples

The results indicate that for any given PCM length, a combination of small taper ratio and large inlet hole-to-absorber area ratio are essential to increase the operation time and the average power produced during the night time.

Solar Energy

It was necessary to add four separate air inlet holes with large diameters.

Medical Engineering & Physics

On the other hand, the calculation results with the k ɛ turbulent model agreed well with the measured flow rates at inlet holes of the lower core plate.

Nuclear Engineering and Design

The measured flow rates at inlet holes of the lower core plate were utilized for validating for the general turbulent model, for example, the k ɛ turbulent model.

Nuclear Engineering and Design

A ready-to-use measurement chip was prepared by attaching a plastic body with inlet holes to a substrate on which the patterned cellulose membrane had been modified with antibody followed by blocking reagent.

Sensors and Actuators B: Chemical

Expert writing Tips

Best practice

When describing technical designs, use "inlet hole" to clearly indicate a specific entry point for fluids, gases, or other materials.

Common error

Avoid using "inlet hole" when a more general term like "opening" or "aperture" is sufficient. "Inlet hole" implies a specific function of allowing entry into a contained space.

Linguistic Context

The phrase "inlet hole" functions as a noun phrase typically used to identify a specific opening or entry point. It's commonly found in technical and scientific contexts to describe a feature of a device or system, as shown in Ludwig's examples.

Expression frequency: Uncommon

Frequent in

Science

80%

Wiki

10%

News & Media

10%

Less common in

Formal & Business

0%

Encyclopedias

0%

Reference

0%

Ludwig's WRAP-UP

In summary, "inlet hole" is a noun phrase that correctly and clearly identifies an opening designed for entry, commonly in technical or scientific contexts. Ludwig AI confirms its usability in written English. While not extremely frequent, it is a recognized term, particularly within the science domain. When writing, ensure the context aligns with this specific meaning, avoiding its use when a more general term would suffice. Consider related alternatives like "entrance aperture" or "entry port" for nuanced variations.

More alternative expressions

Phrases that express similar concepts, ordered by semantic similarity:

entrance aperture

Replaces "hole" with "aperture", suggesting a more technical or precise opening.

entry port

Substitutes "hole" with "port", implying a controlled or designated entry point.

input aperture

Replaces "inlet" with "input" and "hole" with "aperture", indicating where data or material enters.

intake opening

Uses "opening" instead of "hole", offering a broader and less specific term.

feed aperture

Replaces "inlet" with "feed", focusing on the function of supplying something.

supply opening

Highlights the provision of something through the hole.

access point

Shifts the focus to accessibility rather than a physical hole.

induction port

Suggests the process of drawing something in through the designated opening.

introduction point

Emphasizes the action of introducing something through the opening.

receiving aperture

Focuses on the act of receiving something through the opening.

FAQs

How to use "inlet hole" in a sentence?

You can use "inlet hole" to describe a point of entry, for example: "The solution was injected through the "inlet hole" into the chamber."

What can I say instead of "inlet hole"?

Depending on the context, you can use alternatives like "entrance aperture", "entry port", or "intake opening".

Which is correct, "inlet hole" or "outlet hole"?

Both "inlet hole" and "outlet hole" are correct, but they describe opposite functions. An "inlet hole" allows entry, while an "outlet hole" allows exit.

What's the difference between "inlet hole" and "air vent"?

An "inlet hole" is a general term for an entry point. An "air vent" is a specific type of opening designed to allow air to enter or exit a space for ventilation purposes.