Sentence examples for injector flow from inspiring English sources

The purpose is to check for faults in an injector flow within a duplex burner.

Additionally, an additive injector flow channel dependent dispersion effect was found.

The injector flow characteristics data obtained in this study could be used as basic design information for further development of urea SCR injectors.

Injector flow dynamics and primary breakup processes are known to play a pivotal role in determining combustion and emissions in diesel engines.

The effects of orifice geometry on inner nozzle flow, spray, and combustion processes are examined by coupling the injector flow and spray simulations.

Diesel engine performance and emissions are strongly coupled with fuel atomization and spray processes, which in turn are strongly influenced by injector flow dynamics.

To investigate the injector's flow characteristics and find a method of improving the injector's flux, a calibration test stand was designed for gas injectors that can exactly calibrate the injector's flow characteristics under injection pressure from 0.2 MPa to 0.45 MPa and injection duration from 1 ms to 10 ms.

The disintegration of turbulent liquid jets in gases, a process termed turbulent primary breakup, has many industrial applications, especially in liquid injection systems whose injector internal flow results in enhanced turbulence generation.

The model combustor was designed to provide a fairly comprehensive set of tested effects: sonic vs subsonic inlets; oxidizer tube lengths that were either quarter-wave, half-wave, or off-resonant acoustic equivalents to the combustion chamber; a significant injector mean flow with Ma∼0.4; and a varied combustion chamber length.

A 1-mL volume of sample was then injected in the splitless injector (260 °C; flow 14.9 mL min−1) of the gas chromatograph (Agilent 6890 Series; Palo Alto, CA, USA) combined with an MS detector (Agilent 5973 Network MSD, USA) and SPME autosampler (Combipal, Varian Inc., USA).

In an economical plan the location of injectors and flow rate of each one should be determined precisely, and it should be noted that the best plan is not necessarily the one with the highest injection rate.