Sentence examples for excess resin from inspiring English sources

A glass slide (1.1 mm thick) was applied on top of the mylar strip and pressure applied to remove excess resin.

Excess resin was removed with a dental explorer, and photopolymerization was performed (Radii Cal LED; SDI, Bayswater, Australia) for 40 s (10 s on each face: mesial, distal, occlusal, and cervical) with an intensity of 1200 mW/cm2.

A co-cured joint, which uses excess resin extracted from the composite material (or the polymer material) as the adhesive, has several advantages compared with the adhesively bonded joint.

Cure cycle optimization necessitates resin viscosity optimization for appropriate wetting of fiber preform and to minimize excess resin bleed out, which results in an optimal fiber volume fraction of 58 60%.

Studies in Greece, Spain and China, on the other hand, indicate that pine growth is negatively impacted by resin extraction (Papadopoulos 2013; Génova et al. 2014; Chen et al. 2015) likely as a result of carbohydrates not being invested in tree growth but in excess resin production.

Excess resin was trimmed away to allow viewing of the embedded embryo using transmitted light.

For CAND1-CUL3, purified GST-CAND1 or GST was incubated in excess with resin at 4°C resulting in GSH-resin-GST or GSH-GST-CAND1 resin.

Briefly, a 3-fold excess of resin (vs a molar amount of peptide) was swelled in dichloromethane (DCM) for 40 min, after which the resin was washed with (three times each) DCM, dimethylformamide, methanol, deionized water, and a degassed 1 1 100 mM ammonium bicarbonate/acetonitrile mixture.

At the end, the excess soft resin is cleaned away using a chemical bath.

X-ray micro-tomography analyses reveals that two main defects are generated by the process, namely residual support material and excess of resin trapped inside the porous network.

In this report, the preparation of controlled epoxy thermosets containing varying amounts of excess epoxy resin having essentially complete excess epoxy conversion is described.