Sentence examples for alignment parallel to from inspiring English sources

There is another clear volcanic island alignment parallel to the adjoining ocean trench in the northern Mariana islands.

Preferential alignment parallel to the long strut axis and decreased spatial variability were observed to occur with increasing pore aspect ratio.

We demonstrated that micropattern alignment parallel to the flow direction enhanced flow-resistant EC adhesion, while micropattern alignment perpendicular to the flow direction attenuated it.

Herein, we demonstrated that anisotropic substrates with a groove depth of ∼317 nm and ∼1988 nm promoted human tenocyte alignment parallel to the underlying topography in vitro.

The lower hemisphere projections of the P-axes show an E W alignment parallel to the trend of the NAFZ, while the T-axes are oriented in direction normal to the NAFZ.

AFM images of the folded chains on the surface of s-PS SGC suggested their alignment parallel to the direction of the growth face of the truncated-lozenge shaped crystal.

After rinsing with methanol, the AFM revealed that most of cylindrical microdomains orientation was re-alignment parallel to the substrate, still it was clear that 15 min is not enough to fulfill the re-alignment process and thus the coexistence of normal and parallel alignments of nanodomains were observed (Fig. 5a).

With a single CNT 20-layer web interlayer added, the electrical conductivity increased by 25% when the CNT web alignment was perpendicular to that of the fibres, and by 15% when the CNT web alignment was parallel to the fibres.

Two north south trending cross sections (Fig. 6) are constructed for the study area keeping alignment almost parallel to the Gorai-Modhumati river covering the major geomorphic units.

The remainder of the femoral preparation was performed with the use of a standard posterior referencing guide with the goal of rotational alignment being parallel to the epicondylar axis using a measured resection technique.

This strategy has been implemented using a caplet design with perforating channels of increasing width (0.2, 0.4, 0.6, 0.8 or 1.0 mm) and variable length, and alignment (parallel or at right angle to tablet long axis).