The system is modeled as two inertia (motor and load) connected by a compliant transmission.
The dynamic simulation of satellite components requires the ten inertia parameters (mass, mass center three coordinates and inertia tensor, 3 × 3 matrix).
The dynamic absorber is comprised of two inertia rings connected, via spring-like material, to both the driver side (motor) and the driven side (compressor).
It is shown in this investigation that the non-linear mass matrix of the initially curved plate can be decomposed into four inertia matrices, which all depend on the finite rotation as well as the elastic deformation of the plate.
As a result, an ordinary stiffness matrix, a geometric stiffness matrix due to pressurisation and centrifugal forces, and three inertia matrices incorporating squares of natural frequencies, products of rotational speed and natural frequencies and squares of the rotational speed are derived.
Vinyoles proposed three kinds of inertia: " Three inertias are barriers to change: physician's inertia, patient's inertia, and health authorities inertia", but the respective definitions remained implicit [ 24].
The model consists of a spur gear pair, two shafts, two inertias representing load and prime mover and bearings.
The model includes a spur gear pair, two shafts, two inertias representing load and prime mover, and bearings.
The system consists of a gear pair, two shafts carrying gears, and two inertias representing drive and load in the system.
The contribution of this paper is to demonstrate that horizon-1 model predictive control based on flexible Lyapunov functions and piecewise affine drivetrain models with three inertias provides an effective solution to driveline oscillation damping.
