Sentence examples for yielding strength from inspiring English sources

The elastic modulus, yielding strength and deformation are studied.

The stress strain curve under extension loading, elastic modulus, yielding strength and plastic deformation were studied.

The modified shear lag theory was considered to describe the effect of yielding strength.

On the other hand, the former showed an evident increase of yielding strength by about 40% relative to TPEE, while the latter only by about 10%.

The optimization of the cross-section is performed using the trust-region method (TRM) based on the failure modes of yielding strength, deflection limitation, local buckling, distortional buckling and lateral torsional buckling.

Tensile test results indicated that incorporation of Lotader and CBC did not cause a significant reduction on mechanical properties of the blends, on the contrary caused an enhancement of yielding strength.

The fraction of beads that detached at a given force level was a measure of the adhesion strength, or yielding force.

Unlike cell stiffness, the binding strength also depends on the yielding force of those molecular interactions.

A mechanical model is established to derive theoretical equations for calculating the stiffness, the yielding shear strength and ultimate shear strength of the panel zone.

A bulk nanostructured alloy with the nominal composition Cu 30Zn 0.8Al wt.% (commercial designation brass 260) was fabricated by cryomilling of brass powders and subsequent spark plasma sintering (SPS) of the cryomilled powders, yielding a compressive yield strength of 950 MPa, which is significantly higher than the yield strength of commercial brass 260 alloys (∼200 400 MPa).

Two controls were considered yielding additional strength for the study, whose statistical power was low, as it always is with pilots.