The phrase "yielding material" is correct and usable in written English.
You can use it when you want to describe a process that produces tangible results. For example, "The research yielded material of great value to our investigation."
The CY system makes an extraordinarily high ductility demand on the compression yielding material.
But it points out that artifacts ranging from 2000 to 20,000 years old were found mixed together, and in a stratum above the one yielding material that is 600 to 700 years old.
In the plastic case, however, the propagating pulse was found to have a strong dependence on the yielding material, not on the dimer mass ratio.
We use molecular statics simulations with the embedded atom method potential to delineate yielding (material instability) and buckling (structural instability) in gold nanowires deformed axially in compression.
In the present work we employed this useful occurrence for gel-processing/drawing of i-PP, yielding material with Young's moduli of 35 GPa, tensile strengths of approximately 1 GPa and melting temperatures measured for constrained samples as high as 228 °C.
The body of work resulting from the first era was a precursor of the alternative rock of the 1980s and 1990s, at the same time yielding material today considered an outstanding example of power pop.
More importantly, increasing the Fe content in the N/S-co-doped carbons results in remarkable increases in microporosity, yielding materials with SSA of up to 1240 m2g-1.
The use of suitably modified clays in nanocomposites with high clay contents eliminates this superstructure formation, yielding materials with enhanced performance.
Several reaction conditions were tested, yielding materials with saturation magnetization between 45 and 63 emu g−1, particle size between 2 and 200 μm and average diameter between 11.2 and 15.9 μm, surface area between 49 and 103 m2 g−1 and pore diameter between 2 and 60 nm.
However, it was found that if the fibers in successive layers were perpendicular to each other the inter-bundle attraction was minimized, maximizing the number of active CNT tips and yielding materials that exhibit the best FE performance reported for any material to date.
Variation of the network parameters and swelling conditions enabled "tuning" of the hydrogels' physical properties, yielding materials with water content between58%and90%90% water, tensile strength between 2.0 MPa and 12.0 MPa, and initial Young's modulus between 1.0 MPa and 19.0 MPa.
