Tools needed to do an oil change on a 1999 Honda CRV are going to be; 17mil combination wrench or 17mil box end wrench doesn't really matter, oil catcher, rags, oil filter remover tool, new oil filter #7317, and 4 liters of 5W-30 oil.
This will help get some working space, where it is difficult to loosen and tighten the lock bolt on the power steering tensioner with a combination wrench (14mm) even by switching ends of the wrench.
If a combination wrench is used, do not use the open end of the wrench because it may strip the flats before loosening the bleeder screw.
The WD-40 is to loosen screws, the combination wrench is 10 mm; If you have them, use a 10 mm socket wrench and a ratchet (both not shown in the picture) as they will make the job quicker.
Possibly, try a box end wrench/or combination wrench, with a pipe "cheater handle" for more leverage.
Remove the old wheels using a combination wrench.
Remove the wheels by using a combination wrench.
Using a 10mm nut-driver or combination wrench, remove the cable to the negative post of the cranking battery.
To remove the oil pan bolt you are going to turn the combination wrench to the left.
Before proceeding, make sure you have a radiator key, a screwdriver, a wrench or some combination of implements so that you'll be able to open the valves on every radiator in your house.
