Sentence examples for woven specimen from inspiring English sources

Compared to a [452/02/−452/902]s carbon woven specimen, the carbon fiber damage area, internal delamination area and damage depth for the hybrid one are 4.94 times, 2.26 times, 3.21 times greater under 22 kA lightning strike and 3.34 times, 1.97 times, 1.67 times greater under 32 kA strike, respectively.

The process parameters considered were cutting speed, feed, depth of cut, and work piece type (E-Glass mat and E-Glass woven specimen).

In the cases of multi-ply construction, the modes of failure for woven fabric specimens are by means of delaminations while the multi-ply knitted shells still exhibit similar behaviours to that of the single-ply specimens.

The staining distinguishes bone at the surface of the specimen (green) as woven and lamellar bone, and fibrous tissue/marrow-like tissue (red).

As a result, the peak stress and toughness of the Kevlar-woven fabric specimen increased by as much as two times, with increasing strain rate in a range of 1182 1460 s−1, whereas the strain at peak stress decreased by approximately 16%.

This test method was used trying rectangular carbon, aramid and glass FRP strips in which the reinforcing fibres were in the form of reinforcing woven fabric (carbon and aramid FRP specimens) and multi-axial fibre reinforcements (glass FRP specimens).

Nevertheless, the energy dissipated by the hybrid 3D woven composites was enhanced if the specimen was impacted on the carbon face.

Results show that specimens having outer layer of woven fabric exhibited better impact properties than that of the specimens having outer layer of knitted fabric.

All the literature works concern a specimens with moulded holes made of woven fabric.

Double cantilever beam (DCB) specimens fabricated from a graphite/epoxy (G0814/913) woven prepreg containing a straight through notch were tested by means of constant amplitude fatigue.

The entangled sandwich specimens have glass fiber cores and glass woven fabric as skin materials.