Your English writing platform
Discover LudwigExact(37)
It has been observed that during the transition from the cycle of filling to the cycle of emptying the working chamber, the pressure in the motor's working chamber changes linearly as a function of the shaft rotation angle which has a significant effect on leakage in the commutation unit clearances.
The shock absorber has been modelled by dividing it into various subsystems that correspond to each working chamber and main components.
Oil injected screw compressor packages inject oil not only into the drive train bearings but also into the compressors working chamber.
A millimetre-scaled prototype with bipolar discharge configuration, which consists of two pin electrodes, nozzle, working chamber, two circulating channels and three hotwires, was designed, manufactured and investigated.
Two types of air locks are in general use: the horizontal, for tunnels, in which the doors are hinged on vertical axes; and the vertical, for caissons, in which the door arrangement must make provision for the cable that hoists material from the working chamber to the surface.
It is an operation of some delicacy, because the flotation effect of the compressed air adds a further element of instability to the monolith, and a blow (sudden leakage of air) under the cutting edge may result in flooding of the working chamber.
Similar(23)
The types of pulse generators and working chambers, used in the reported liberation tests, are presented.
The optimal location of the vapor injection inlets is at the place where the vapor can inject into the working chambers when they just be closed.
The armored barbettes that held the turrets, working chambers, and shell rooms were protected with 183 mm of armor.
On the other hand, the need to evaporate in a low-pressure environment translated directly to work chamber.
In this machine, the work chamber is bound by four identical rotors and two side plates.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com