Sentence examples for workability requirements from inspiring English sources

SCC often needs chemical additives to achieve workability requirements.

So far, concrete mixes were designed only for strength and workability requirements.

The final mix design exhibited electrical resistivity of 115 Ω-cm in the laboratory and 992 Ω-cm in the field, while completely meeting strength and workability requirements.

Maintaining the strength criterion for multiple cracking while satisfying first cracking and compressive strength, cost, and workability requirements represents a delicate balance when designing ECC (Li et al. 2001 , 2002.

Overall, it is expected that the proposed models may be helpful to practicing engineers for making judicious decision on selection of amount of NC or CNT to improve rutting and workability requirement of asphalt binder.

Due to the high workability requirement, guidelines associated with the design of SCC recommended the use of chemical admixtures such as high-range water reducer (HRWR) and viscosity modifying admixtures (VMA) with minimum water content varying between 0.37 and 0.4 (EFNARC 2005).

In this study, the effects of coarse pumice aggregate (CPA) treatment with alkyl alkoxy silane (AAS) and direct addition of AAS as an admixture at different dosages on workability, water requirement, early strength development and water absorption of pumice concrete blocks have been investigated.

Hence, based on the limited work, the authors suggest an optum fiber factor of 0.40 for minimum shear strength and a fiber-factor of 1.225 for maximum shear strength based on workability and constructibility requirements in PC beams made with high strength concrete.

Based on the results of this limited study, the authors suggest an optum fiber factor of 0.40 for minimum shear strength and a fiber-factor of 1.225 for maximum shear strength based on workability and constructibility requirements in PC beams made with high strength concrete.

At 50% substitution the water requirement to attain the required workability fell by 6% and compressive strength increased from 2.84 MPa to 7.04 MPa.

The results show that geopolymer made using Sarawak fly ash can be a potential construction material depending on the requirements of workability and compressive strength.