Sentence examples for workability characteristics from inspiring English sources

Rheological behaviors are the essential workability characteristics of fresh concrete.

Incorporating treated coarse LWAs increased the workability characteristics of SCLCs.

Recommended workability characteristics and rheological parameters of SCC to ensure adequate dynamic stability level were proposed.

From this study it may be concluded that the use of GWG microparticles as cement substitution improves ASR, drying shrinkage and workability characteristics, while the hardened behavior increases up to 20%% replacement.

To limit the number of variables merely to the type of admixture used in the concrete mix, the experiments of the first two phases of the research aimed at establishing an optimum mix design with a common dosage of second or third generation superplasticizer that would ensure the minimum workability characteristics for vibrated concrete (VC) and the high consistency properties for SCC.

The measurements show a good workability characteristic for all samples tested and an improvement of the rheological characteristics as a shear, storage modulus, tan δ and rutting resistance criterion at high in service temperature especially for the sample with higher content in waste NBR which represent an interesting result from an environmental point of view.

Workability and strength characteristics of the concrete and microstructure of selected samples were obtained.

Cement-bonded strawboard was developed as a new siding product with desired aesthetic attributes, workability and engineering characteristics.

To find out the best possible ECC mixture under the range of parameters investigated for the desired workability and mechanical characteristics, a multi-objective optimization problem was defined and solved based on the developed regression models.

Therefore, concrete substituted by less than 20% of SBFC in OPC weight will enhance the early compressive strength of concrete, and workability and mechanical characteristics are considered to have more than equivalent performance when compared to concrete using 100% of OPC.

Using this method, we achieved the aim of predicting the SCC workability from the rheological characteristics of paste.