In addition, the ground must be able to withstand the load of heavy fire engines and associated supporting jacks.
The buried pipes should be designed properly to withstand the loads imposed by the backfill soil weight and traffic loads.
These components must possess a minimum strength to withstand the loads occurring during both production and operation of the board.
The "quadrupled" tendon achieved the best UFL, with even the "tripled" configuration having sufficient biomechanical characteristics to withstand the loads experienced during early rehabilitation.
With a better understanding of these types of forces, it may eventually be possible to build coastal structures to better withstand the loads.
The design of any structural system must withstand the loads imposed upon it and in addition must have adequate durability throughout its life.
The structure is confirmed to withstand the load conditions because stress is estimated to be lower than allowable level by FEM analysis.
Stress calculations are made from information provided in the specifications to ensure that columns, beams, and supports withstand the loads and forces placed on them.
This was due to a higher strength layer at the soil surface created by the track which was able to withstand the load of the subsequent passes and protect the soil below from further compaction.
One of the design criteria is the ultimate limit state (ULS), which ensures that the entire STC system will have adequate strength to withstand the load effects imposed by extreme environmental actions.
