Sentence examples for withdrawal flow rate from inspiring English sources

It is further to be noted that the overall exergy and thermal efficiency of an integrated photovoltaic thermal solar system (IPVTS) is maximum at the hot water withdrawal flow rate of 0.006 kg/s.

The emulsion was collected in a 1-mL plastic syringe at a withdrawal flow rate of 2000 μL/h.

The processed droplets were collected in a 1-mL plastic syringe at a withdrawal flow rate of 550 μL/h, and incubated (in darkness) for 30 40 min after collection was finished.

The main channel of the chip splits into two just downstream of the excitation/electrode point (Fig.  1a, bottom), one channel leading to a waste vial and one leading to a collection port connected to a 1-mL plastic syringe, set to a withdrawal flow rate of 165 μL/h.

In this communication, an analytical expression for the water temperature of an integrated photovoltaic thermal solar (IPVTS) water heater under constant flow rate hot water withdrawal has been obtained.

In the summer season, a larger stream temperature increase was identified in the upstream reaches, which was attributable to the decreased flow rate due to water withdrawal.

It is shown that eluent consumption for optimized asynchronous configurations in the higher feed-throughput region can be significantly reduced by modulation of eluent flow rate and selective product withdrawal.

Particles were subjected to flow, via syringe pump withdrawal, through the devices at a constant flow rate of 0.27 mL/h (shear rate of 800 s–1 on bottom of channel) for 1 min and then washed with saline at 0.27 mL/h for 2 min to remove unbound particles.

In nondrought times, the state requires a flow rate of 17.6 million gallons a day at the Totowa plant after the withdrawal of the 75 million gallons.

Each infusion was 2.5 µl at a flow rate of 1.25 µl/min with the cannula remaining in place for a further 3 min before withdrawal.

(ii Gas volumetric flow rate.