Your English writing platform
Discover LudwigExact(3)
Iridium films with lower thickness are found on the sidewalls of the ridges and in the grooves.
The Urbach tail width increases in set 1 film with increase in hydrogen dilution, whereas the band gap shows decreasing trend while reverse is observed for set 2 films with lower thickness nc-Si H films.
In case of multilayer with lower thickness nanocrystalline layers, the band gap shifts toward higher values (1.64 eV to 1.72 eV) on increasing hydrogen dilution from 2 to 4. This can be justified on the basis that intermediate nanocrystalline layer deposition time is only 1 min (Table 1).
Similar(57)
Also, it is revealed that the surface effect plays more important role on the vibration characteristics of the buckled FGM nanobeams with lower thicknesses.
Accordingly, it was suggested that higher surface energy due to the smaller mean grain size and energy dissipation due to decohesion through the coatings corresponds to higher adhesion in coatings with lower thicknesses.
The increase in CBR value leads to design of pavements layers above subgrade with lower thicknesses (maintaining lower thickness required) without compromising pavement strength and performance.
In addition, SnS2 synthesized at a lower temperature (100 °C) has nanoplates with a lower thickness, improving electrochemical performance.
In coatings deposited under a pressure of 200 Pa, unevaporated powder particles were observed along with a significantly lower thickness.
The composites with filler experienced a 15.2% lower thickness erosion rate and a 51.7% lower mass erosion rate, compared to those C/C without filler.
This lower thickness is associated with a higher shear modulus reflecting the formation of a more rigid layer.
K-means cluster analysis shows that lower thickness uncertainties are associated with closely spaced measurements.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com