Sentence examples for with height profile from inspiring English sources

(a) AFM image of graphite oxide sheets with height profile.

The SEM and AFM analyses with height profile diagram showed that the addition of the peel extract to the corrosive medium results in the formation of a protective film on the AA surface.  .

Figure 7 AFM tapping mode images of nanocontact printed titin multimer protein lines on a silicon surface a at large scale and b at high-resolution with height profile cross section below[136].

AFM images of the graphene-like nanosheets (1 to 3 layers) (a) synthesized from natural graphite flake (b), with height profile (c) acquired in the cross-section indicated by black dashed line in (b).

Figure 3 AFM image of polyquaternium-stabilized graphene membrane with height profiles.

Figure 3 Two typical AFM images of graphene sheets with a height profile taken along the straight line (a, b).

c AFM image of the long Bi2Te3 belt, with the height profile in red, showing a thickness of 430 nm and a width of 4 μm, i.e. an aspect ratio of thickness to width of ∼1 10.

Representative AFM images showing a globule at one end of the as-grown catalyst-free SWCNT along with the height profile of such globule feature to the right while the height profile of the grown CNT is to the left of the AFM image.

This was in agreement with the reported AFM results on few-layer graphene sheets [5, 8, 17], where the single-layer graphene is always approximately 1 nm, probably due to different attraction force between AFM tips and graphene as compared to SiO2 and imperfect interface between graphene and SiO2. Figure 2 Tapping mode AFM image of GO on SiO 2 /Si with step height profile.

In this original process grayscale lithography and thermal reflow were combined, i.e. a positive resist was locally exposed with a modulated dose of high energy (100 keV) electrons, which enabled to create a height profile with distinct steps after development in a suitable solvent.

AFM of H6 reveals an undulating height profile varying from 1.5 to 6 nm, consistent with a helical tape.