Suggestions(1)
Exact(3)
c CT with cross section of 13C loop coil marked with arrows Fig. 2 mMR water phantom setup.
A novel design and micro-fabrication were developed for micro-proton exchange membrane (PEM) fuel cell stack bipolar plates with cross section of 5 cm2 and thickness of about 650 μm.
The samples of composite materials with cross section of 7.2 × 3.4 mm2 (or 2.6 × 5.2 mm2) were placed in cavity of rectangular waveguide and completely fill its cross section.
Similar(54)
FRP columns with cross sections of sheet pile, square tube, I-section and T-section have been studied and the shape effect on the instability is discussed.
Their high index contrast (Δn∼0.15 at the wavelength of 1550 nm) allows to make small size waveguides with cross sections of 1.5×1.5 μm².
Square beams (1 m) with cross sections of 25, 12 and 5 mm, and round beams (1 m) with diameters of 28, 17 and 11 mm were used.
Air water adiabatic flow at atmospheric pressure and room temperature was driven through a 3.6 m long rectangular ribbed test section with cross-section of 100 × 50 mm.
Meander-shaped QMG with cross-sections of 2.2 × 0.8 mm and an effective length of 180 mm was reinforced by meander-shaped NiCr bypasses.
For cases with cross-sections of a few millimetres a model based on thin acoustic boundary layers will not be applicable in the frequency range of interest.
Cold-formed stainless steel oval hollow sections (OHS) offer the combined aesthetic appeal of circular hollow sections and stainless steel, together with the structural efficiency associated with cross-sections of differing geometric properties about their two principal axes.
I-shaped short QMG current limiting elements with cross-sections of 2.2 × 0.8 mm and an effective length of 20 mm were reinforced by I-shaped NiCr or SUS bypasses.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com