Suggestions(1)
Exact(7)
The geometry parameters of catenary system include contact wire height, stagger, trolley frog, etc.
The contact wire height and stagger were computed based on the displacement of slide plates.
The contact wire height and stagger were computed based on the calibration of the camera.
The contact wire height and stagger were computed based on the localization of the contact wire using image processing techniques.
The contact wire height and stagger were measured by determining the frontier points of the abrasion surface of the contact wire using edge detection algorithms.
In this way, geometry parameters of the catenary system, such as the contact wire height and stagger, can be dynamically monitored.
Similar(53)
In fact, reducing the wires height to diameter ratio favors the M perpendicular magnetized state.
It leads to small differences in the wires' height, as shown in Figure 4d.
Based on detailed analysis of the theory of cable electromagnetic coupling and forecasting simulation, this paper summarized several factors that affect the electromagnetic coupling, such as distension between wires, height from the reference ground and impedance matching, and several related suggestions were given to reduce electromagnetic interference between cables or wires.
Figure 13b shows the comparison between the contact wire nominal height with and without synthetic contact wire irregularity generated from the fitting curve.
Using a bubble level attached to the IMASS connection wire, the height of the IMASS table was adjusted so that the IMASS connection wire was axial (level) to the catheter insertion site from which the catheter was pulled.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com