Sentence examples for width production from inspiring English sources

In PKN and KGD models, which are used to predict fracture width, production rate from the reservoir above that would make a similar effect as injection rate from the aquifer below has been used as an input flow rate.

Relation between fracture width and production rate is the output of Figure 11 is the output (data is presented in tarmat and fluid sections of Table 2).

These effects, i.e., a decrease in flame temperature, flame width and production of minor species, are found to be the most important for high values of inlet H2 mass fraction and for low strain rates.

Open image in new window Fig. 9 Width versus production rate graphs for various tarmat thicknesses for PKN and KGD models.

b Pressure differential versus time differential graphs for various flow rates (cross-sectional area = 51.65 acres) Open image in new window Fig. 11 Width versus production rate graphs for various tarmat thicknesses (PKN and KGD model) (E = 8,000,000 psi, v = 0.30, hf = 47.82 ft) Open image in new window Fig. 12 Fracture permeability versus fracture width.

The "SPA convention" provides a clear base for calculating masses, mixing angles, decay widths and production processes.

The control of the slab width in actual production is realized by the widely use of vertical rolling (edge rolling).

By this technique, compactness, higher efficiency, narrower spectral line width and lower production cost of the diodes are possible.

Therefore, it is believed that a larger pulse width led to production of hydroxyl radicals for a longer time, resulting in a higher decomposition efficiency of RhB in this study.

Sheets are cut in the standard lengths and widths used in production and household applications.

For example, the standard fabric width for commercial denim production is 60 inches wide.